2-Way Convertible Component / Coaxial System: 5 x 7 / 6 x 8-inch (125 x 180 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
Many people mistakenly believe that an oval speaker cannot perform as well as a round one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.
The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are not available for this product.
Sonic character: Clean and Powerful
Sold as a pair.
JL Audio C3-570 Convertible 5''x7'' Coaxial / Component Speakers
Specifications:
- Evolution® C3 5 x 7 / 6 x 8 in. / 125 x 180 mm Convertible Components
- Also fits 6x8-inch factory locations. Perfect fit in most newer Ford vehicles.
- This speaker system is a perfect fit for many Ford vehicles and others that accept a 5x7-inch or 6x8-inch speaker. Configured for two and four-hole mounting
- configurations.
- Woofers:Injection-Molded Polymer Frame, Patented Elevated Frame Cooling (U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor System, Mineral-
- Filled Polypropylene Cone, Rubber Surround, 1.2-in. / 31 mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll Spider, Ferrite Magnet
- Tweeters:1.00 in. / 25 mm Silk Soft Dome with Ferrofluid Cooling and Damping and Neodymium Magnet Fixed Angle Flush-Mount, Surface-Mount and Coaxial-
- Mount Systems
- Continuous Power Handling:75 Watts
- Rec. Power Range (per channel): 25 - 150 Watts
- System Efficiency:90.0 dB @ 1W/1m
- 96.0 dB @ 1W/0.5m
- System Nominal Impedance:4 ohms
- System Frequency Response:48 Hz - 25 KHz ± 3 dB
- WOOFER PHYSICAL SPECIFICATIONS
- Woofer Frame Outer Diameter* (A): 5.52 x 7.68 in. / 140.2 x 195.1 mm
- Woofer Magnet Outer Diameter (C): 4.08 in. / 103.6 mm
- Frontal Coaxial Tweeter Protrusion*** (D): 0.78 in. / 19.8 mm
- Woofer Mounting Depth (G): 2.52 in. / 64.0 mm
- Tweeter PHYSICAL SPECIFICATIONS
- Flush Mount Fixture Diameter (A): 2.12 in. / 53.8 mm
- Flush Mount Mounting Hole Diameter (C): 1.875 in. / 47.6 mm
- Flush Mount Mounting Depth (D): 0.71 in. / 18.0 mm
- Surface Mount Fixture Diameter (E): 1.93 in. / 49.0 mm
- Surface Mount Protrusion (F): 0.95 in. / 24.1 mm
- Crossover PHYSICAL SPECIFICATIONS
- Height (A) 4.72 in. / 119.9 mm
- Width (B) 3.36 in. / 85.3 mm
- Depth (C) 1.44 in. / 36.6 mm